Manual Phased Array Corrosion Investigation using a Prisma
An easy-to-use solution to assess the remaining wall thickness of tubes, pipes and vessels.
This package is an affordable and easy-to-use solution to assess the remaining wall thickness of tubes, pipes and vessels. In time based mode and with an encoder, Prisma has both B-scan and C-scan capability. Both tools improve the detection of thickness variations and pitting spots. Prisma features all the corrosion visualization tools required to produce a comprehensive report. The unit comes with UTstudio+ software that helps users carry out further analysis such as defect measurement and include annotation. This manual phased-array solution improves inspection coverage and ensures that any corrosion and erosion progression is properly assessed.
|
|
|
|
|
|
|
|
Recommended Package
| Category | Part Number | Description |
| Product | PRISMA UT BNC KIT or PRISMA UT LEMO KIT |
Prisma UT BNC Standard Kit or Prisma UT LEMO Standard Kit |
| Product option | PRISMA 16:64 TOFD | Prisma software 16:64 PA (up to 16 focused elements over 64 arrays) |
| Probe | X3A-003 or D5A-001 Note: X3 probe at 5 MHz shall be considered as the default one |
X3A-5M64E-0.6x10-SQX2.5 |
| Wedges | X3AW-001 Note: X3 wedges shall be considered as the default ones |
X3AW-0L25-IHC in AOD range of: 4", 6", 8", 12", 16" and 24" and flat. |
For area sizing and high-resolution scans, add one universal encoder with this kit. It is sold as AXYS-001 and has a 2.5-metre cable. The low clearance and compact design are fit for most encoding purposes.
Frequency recommendations according to the thickness (T):
T < 5mm = 10MHz
5mm < T < 75mm = 5MHz
75mm > T = 2.25MHz
For further information, please contact the Sonatest Sales Team: sales@sonatest.com